KONICA MINOLTA MC7450 PPD DRIVER

Close the top cover. If one is damaged, replace it. The waste toner bot- Prepare a new waste tle is nearly full. Print several blank sheets and the excess toner should disappear. If an antistatic wrist strap is provided in your printer option kit, attach one end of it to your wrist and the other end to the bare metal chassis on the back of your printer. This menu cannot be used by the user.

Uploader:	Tojaramar
Date Added:	24 August 2006
File Size:	15.86 Mb
Operating Systems:	Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X
Downloads:	33320
Price:	Free* [*Free Regsitration Required]

If the tray extension is already pulled out, push it in.

magicolor 7450II / GA

Concerning target drivers, etc. If the problem is not resolved, even after all of the above have been per- formed, contact Technical Support with the error information. The print job s is are cancelled.

If the operator or service representative must be called, the sym- If a warning occurs, the symbol the window.

Imaging Unit This message Configuration Menu Overview The magicolor configuration menu accessible from the control panel is structured as shown below. Page Solving Problems with Media Misfeeds " Frequent misfeeds in konnica area indicate that area should be checked, repaired, or cleaned.

Support & Downloads - Business Products | KONICA MINOLTA

Media sizes Tray 1 Manual feed nc7450 Paper width: Pull out Tray 2, and then remove all media from the tray. Replace it with a new imaging unit. Page Loading Envelopes 1 Pull the lever, and then open the right side cover. Transparencies " " " " Do not fan transparencies before loading them. The waste toner bot- Prepare a new waste tle is nearly full. If you open the front cover before the message READY appears, koncia printer stops and repeats the calibration cycle.

Solution Check your cable. Any piece of media left in the printer, whether large or small, can obstruct the media path and cause further misfeeds. Page 77 " All factory default values are shown in bold. The printing order is yellow, magenta, cyan, then black.

Konica Minolta Magicolor

Make sure that the media guides are firmly pushed against the left and right sides of the banner paper. Slide the media guides to pro- vide more space between them.

Tray 2 Loading Media Pull out Tray 2.

Please select another Change Location. Minollta Problems with Media Misfeeds " Frequent misfeeds in any area indicate that area should be checked, repaired, or cleaned. Test all thick stock to ensure acceptable performance and to ensure that the image does not shift.

The printer must complete a second calibration cycle after the toner cartridge has been replaced. Doing so may damage the printer and cause the print quality to deteriorate.

Lift up the banner tray paper guide. Page 97 2 Connect the USB cable to the digital camera and to the camera direct port.

Average 28W or less without options Amperage V: A maximum of 10 sheets of thick paper 3 and envelopes can be loaded. If a digital camera with PictBridge 1. Page 4 5 Slide the media guides against the edges of the paper.

Konica Minolta

Duplexing Duplexing envelopes, labels, postcards, glossy stock or transparencies is not supported. Media matches the printer specifications. Windows 10 October Update. One or more of the Remove the imaging units and check imaging units may be them for damage.